Wireless-Ready Emergency Pull/Push Station
Call Placed LED. Requires Single-Gang Electrical Box. Use with WSM555 Wireless Support Module.
Manuals & Diagrams
Architects & Engineer's Specs
The Wireless Emergency Push/Pull Stations shall be shall be Alpha Communications® AlphaEcall™ 200 series model WES555, or approved equal. Operation of emergency signals shall be accomplished by a short pull on the nylon cord or by pulling / pushing down on the Red lever marked 'EMERGENCY".
The Red "CALL PLACED" L.E.D. indicator shall light to assure the resident that the call has been placed. Switching mechanism shall consist of a reliable DPDT switch. The WES555 shall be used in conjunction with the WSM555 wireless support module.
When used with a separate 'check-in' pushbutton such as the SF113, the WSM555 needs to be replaced with the WSM555-2 dual input version.
The WES555 is typically used as a toilet emergency pull station and is not designed to be used in wet or damp environments. For wet or damp (or shower) type applications use the model# WES537 station instead.
All electronic components needed for these features shall be mounted on a printed circuit board and all station components shall be mounted an a rugged ABS plastic faceplate. The station(s) shall be installed the model# IHS527 surface back box. Plug-in connectors shall be provided for connections.
Contractor shall observe all local and national electrical and building codes.