Wireless-Ready Emergency Pull/Push Station, Water-Resistant
Call Placed LED. Requires Single-Gang Electrical Box. Use with WSM537 Wireless Support Module.
Manuals & Diagrams
Architects & Engineer's Specs
The Wireless Emergency Push/Pull Shower Stations shall be shall be Alpha Communications® AlphaEcall™ 200 series model WES537, or approved equal. Operation of emergency signals shall be accomplished by a short pull on the nylon cord or by pulling / pushing down on the Red lever marked 'EMERGENCY".
The Red "CALL PLACED" L.E.D. indicator shall light to assure the resident that the call has been placed. Switching mechanism shall consist of a reliable DPDT reed switch. The WES537 shall be used in conjunction with the WSM537 wireless support module.
The WES537 is typically used as a shower type emergency pull station and is designed to be used in wet or damp environments. For toilet (dry) type applications use the model# WES555 station instead.
All electronic components needed for these features shall be mounted on a printed circuit board and all station components shall be mounted an a rugged ABS plastic faceplate. The station(s) shall be installed in a single gang ring with square box. Plug-in connectors shall be provided for connections. Station shall be supplied with a rubber gasket.
Contractor shall observe all local and national electrical and building codes.