24VDC RELAY SUPPORT MODULE
Manuals & Diagrams
Architects & Engineer's Specs
The specialty relay module(s) shall be Alpha Communications® RY024AM or equivalent. Relay shall operate from a 24VDC primary voltage source, and shall provide a 'Form C' dry contact relay output, as long as the 24VDC source is present. All wiring to relay shall be low-voltage Class II wiring, installed as per all federal, state, and local electrical codes. Relay shall surface mount right to the finished wall and shall be installed in a suitable environment that is free from excessive dirt, dust, temperature, humidity, grease and water. Relay can also be mounted behind a calling stations, using the provided mounting holes and cable tie or wire wrap.
Contractor shall observe all local and national electrical and building codes.