APT. BUZZER CALL PULSATOR UNIT

USED IN ADDITION TO 2/3/5 WIRE APT. AMPLIFIERS FOR PULSATING BUZZERS AT INDIV. APT. DOORS

Model #: R1
Spec Sheet Preview: The Alpha Communications®/S.T.R.™ R1 buzzer pulsator units are used primarily with the S.T.R.™ handset type  entry intercom systems, to provide a pulsating buzzer  signal from the apartment's individual entry door  pushbutton. The R1 unit works in conjunction with the system amplifier  (models NH200A, NH200TV, NH201TVA, NH201TVA-2,  and NH201TT), and produce a pulsating buzzer sound at  the apartment handset, using the same buzzer that is used  to produce a signal from the lobby entry station. Thes …
Get Pricing
Outside Dimensions:
2.125"W x 3.75"H x 2.625"D
(54mm W x 95mm H x 67mm D)

Architects & Engineer's Specs

The power supply/amplifier(s) shall be Alpha Communications®/S.T.R.™ TV32/S or equivalent. Power supply shall operate from a 12VAC (20VA) U.L. Listed transformer (model T1240). All wiring to power supply/amplifier shall be low-voltage Class II wiring, installed as per all federal, state, and local electrical codes. Power supply/amplifier shall surface mount right to the finished wall and shall be installed in a suitable environment that is free from excessive dirt, dust, temperature, humidity, grease and water. Power supply/amplifier shall provide the intercom amplification and signalling power for the proper system operation. For most secure installation, power supply should be installed into a lockable equipment cabinet/housing. Power supply / amplifier shall be installed a safe distance from any source of electrical interference.

Contractor shall observe all local and national electrical and building codes.

Do You Need Assistance?

Our trained sales team can answer your questions right away!
Alpha Communications®
42 Central Drive  |  Farmingdale, NY 11735-1202
Phone: (631) 777-5500  |  (800) 666-4800  |  Fax: (631) 777-5599
Copyright© 1996-2019 Alpha Communications™. All rights reserved.
The information contained in this website is supplied by Alpha Communications® as general information and a service to our customers and potential customers. While we endeavor to supply accurate information, we can take no responsibility for errors or misinterpretations in any of the content of this site. We also reserve the right to remove or change any information and/or documentation from this site where legal requirements are contravened or where complaints are received and upheld. Due to continuous product improvement, all colors, sizes, materials, finishes, model numbers and specifications are subject to change without notice. In order to assist existing customers with older model and discontinued products, this web site also contains information about special-order, discontinued products, and products that may no longer be available, for reference purposes only. Please check with our sales or customer service dept. to determine the availability (and proper wiring) of any products, before quoting, specifying and/or purchasing any products. Except in the case of third-party material reproduced on this site, the information and all content, including logos and artwork, provided herein is protected under the U.S. and Foreign Copyright Laws and may not be copied, reproduced or retransmitted by any means, electronically or otherwise, without the express written permission of Alpha Communications®.