3 WIRE APT. AMPL./POWER SUPPLY

USE WITH HT2001 SER. HANDSETS REQUIRES SS106 TRANSFORMER (MOUNTS INSIDE ENTRY PANEL)

Model #: NH201TT-2
Spec Sheet Preview: These Alpha Communications® / S.T.R.™  NH201TT-2 series amplifier/power supplies are used  with the HT2001 series handset stations to provide  intercom amplification and power to operate the  associated intercom system, and certain optional  components and/or accessories, such as electric  door opener(s) etc.  The NH201TT-2 powers from a 16VAC (30VA)  low-voltage Class II transformer. The NH201TT-2 amplifier/power supplies are designed to easily mount right onto the plastic speak …
Get Pricing

Note(s)

the speaker used on this amplifier module is the 16 ohm model# L1
Outside Dimensions:
2.375"W x 5.25"H x 1.50"D
(60mm W x 133mm H x 38mm D)

Manuals & Diagrams

System-Specific Information

HT3000 Series 2/3/5-Wire Handset Type Entry Intercoms

For 2 Wire NH209TT systems: see system Installation Manual: AWD019 for more complete wiring information.

For 3 Wire NH201TVA or NH201TT Systems: see system Installation Manual: AWD011 for more complete wiring information.

For 3 Wire NH201TVA-2 Systems: see system Installation Manual: AWD109 for more complete wiring information.

For 5 wire NH200A Systems: see system Installation Manual: AWD013 for more complete wiring information.

Related Sounds

Default Sound

Architects & Engineer's Specs

The amplifier/power supply unit(s) shall be Alpha Communications® / S.T.R.™ model NH201TT-2 or equivalent. Power supply unit(s) shall operate from a U.L. Listed transformer (model SS106 or SS146). All wiring to power supply/amplifier shall be low-voltage Class II wiring, installed as per all federal, state, and local electrical codes.

Power supply/amplifier shall be designed to mount directly into the 'TT' or 'TTM' series lobby entry panel stations. Power supply / amplifier shall contain the system amplifier, power supply, speaker and microphone, all in one 'snap-in' assembly. Unit shall snap onto the panel front speaker/microphone grille.

Power supply/amplifier shall provide the intercom amplification and signalling power for the proper system operation. Power supply/amplifier shall be installed a safe distance from any source of electrical interference.

Contractor shall observe all local and national electrical and building codes.

Do You Need Assistance?

Our trained sales team can answer your questions right away!
Alpha Communications®
42 Central Drive  |  Farmingdale, NY 11735-1202
Phone: (631) 777-5500  |  (800) 666-4800  |  Fax: (631) 777-5599
Copyright© 1996-2019 Alpha Communications™. All rights reserved.
The information contained in this website is supplied by Alpha Communications® as general information and a service to our customers and potential customers. While we endeavor to supply accurate information, we can take no responsibility for errors or misinterpretations in any of the content of this site. We also reserve the right to remove or change any information and/or documentation from this site where legal requirements are contravened or where complaints are received and upheld. Due to continuous product improvement, all colors, sizes, materials, finishes, model numbers and specifications are subject to change without notice. In order to assist existing customers with older model and discontinued products, this web site also contains information about special-order, discontinued products, and products that may no longer be available, for reference purposes only. Please check with our sales or customer service dept. to determine the availability (and proper wiring) of any products, before quoting, specifying and/or purchasing any products. Except in the case of third-party material reproduced on this site, the information and all content, including logos and artwork, provided herein is protected under the U.S. and Foreign Copyright Laws and may not be copied, reproduced or retransmitted by any means, electronically or otherwise, without the express written permission of Alpha Communications®.