5VDC POWER SUPPLY FOR RELAY BD

120VAC PRIMARY POWER 2AMP OUTPUT - INCLUDES PC BOARD CONNECTOR ASSEMBLY

Model #: KE-PWR5/2A
Spec Sheet Preview: The Alpha Communications® KE-PWR5/2A power supply  is used to provide electrical power for up to 16 of the RY032AE and/or RY008AE   AlphaEntry™ relay boards .  The  KE-PWR5/2A plugs onto the multi-pin connector on the first RY032AE or RY008AE relay board and the power is then transferred to additional boards using the required CT032AEJ  jumper cable(s). The CT032AEJ jumper cables provide the power and data connection to subsequent RY032AE and RY008AE relay boards.  …
Get Pricing
Outside Dimensions:
2.50"W x .875"H x 2.00"D
(64mm W x 22mm H x 51mm D)

Manuals & Diagrams

System-Specific Information

GB2 2-Wire Audio Intercom System

The GB2™ system uses simple 2-conductor non-polarized wiring making it ideal for new installations as well as for retrofit applications. All audio, video and data functions are fully digital and using the RAP-2150 cable you can run up to 300 meters from the entrance panel to the furthest audio station.

For CAT5 Cabling, the 4 solid color wires must be joined together as one, and the 4 striped wires must also be joined together as one to create your 2-wire cabling structure.

AlphaECall™ 200 Series Non-Voice Emergency-Call System - NON U.L.

See System Installation Manual: AWD235 for more complete wiring information.

GB2 2-Wire Color Video Intercom System

The GB2™ system uses simple 2-conductor non-polarized wiring making it ideal for new installations as well as for retrofit applications. All audio, video and data functions are fully digital and using the RAP-2150 cable you can run up to 300 meters from the entrance panel to the furthest monitor.

For CAT5 Cabling, the 4 solid color wires must be joined together as one, and the 4 striped wires must also be joined together as one to create your 2-wire cabling structure.

Architects & Engineer's Specs

The relay board power supply shall be Alpha Communications® AlphaEntryTM series KE-PWR5/2A or equivalent. Each KE-PWR5/2A board shall provide power for up to 16 of the RY032AE and/or RY008AE relay boards.

All secondary wiring to shall be low-voltage Class II wiring. Power supply shall be installed as per all federal, state, and local electrical and building codes.

Do You Need Assistance?

Our trained sales team can answer your questions right away!
Alpha Communications®
42 Central Drive  |  Farmingdale, NY 11735-1202
Phone: (631) 777-5500  |  (800) 666-4800  |  Fax: (631) 777-5599
Copyright© 1996-2019 Alpha Communications™. All rights reserved.
The information contained in this website is supplied by Alpha Communications® as general information and a service to our customers and potential customers. While we endeavor to supply accurate information, we can take no responsibility for errors or misinterpretations in any of the content of this site. We also reserve the right to remove or change any information and/or documentation from this site where legal requirements are contravened or where complaints are received and upheld. Due to continuous product improvement, all colors, sizes, materials, finishes, model numbers and specifications are subject to change without notice. In order to assist existing customers with older model and discontinued products, this web site also contains information about special-order, discontinued products, and products that may no longer be available, for reference purposes only. Please check with our sales or customer service dept. to determine the availability (and proper wiring) of any products, before quoting, specifying and/or purchasing any products. Except in the case of third-party material reproduced on this site, the information and all content, including logos and artwork, provided herein is protected under the U.S. and Foreign Copyright Laws and may not be copied, reproduced or retransmitted by any means, electronically or otherwise, without the express written permission of Alpha Communications®.