Code-Blue Pull/Push Station

Call Placed LED. Requires Single-Gang Electrical Box.

Model #: EPS156
UL 1069 Listed
Spec Sheet Preview: U.L. Listed 1069 - to the latest standards Simple and flexible operation. RED L.E.D. "Called Placed" indicator (flashing) Call cancel only at point of origin. Flame Retardant type ABS White Plastic Faceplate Can be used as a Pull or Push type station Corridor Zone Light Capability (optional)
Get Pricing

Note(s)

THE EPS156 IS A DIRECT (PLUG-IN) REPLACEMENT FOR THE OLDER SF156B CODE CALL STATION
Outside Dimensions:
2.75"W x 4.50"H x 1.00"D
(70mm W x 114mm H x 25mm D)

System-Specific Information

AlphaLinQ™ 100 Series Audible Visual Nurse Call System - U.L. 1069

See system Installation Manual: AWD183 for more complete wiring information.

AlphaECall™ 200 Series Non-Voice Emergency-Call System - NON U.L.

See System Installation Manual: AWD235 for more complete wiring information.

Architects & Engineer's Specs

The Code Call / Code Blue Push/Pull Stations shall be shall be Alpha Communications® AlphaLinQ™ 100 series model EPS156, or approved equal. Operation of emergency signals shall be accomplished by a short pull on the (optional model CA015K nylon cord or CA016K TPU plastic cord) or by pulling / pushing down on the Blue lever marked 'CODE'.

The Red "CALL PLACED" L.E.D. indicator shall flash to assure the patient that the call has been placed. Switching mechanism shall consist of a reliable DPDT switch. The EPS156 shall be used in conjunction with a AC153 third priority control unit, to provide a separate and distinct flash and tone rate. The EPS156 is not a 'supervised' code call station.

The Red "CALL PLACED" L.E.D. indicator shall flash to assure the patient that the call has been placed. Switching mechanism shall consist of a reliable DPDT switch.

The EPS156 is not designed to be used in wet or damp environments.

All electronic components needed for these features shall be mounted on a printed circuit board and all station components shall be mounted an a rugged ABS plastic faceplate. The station(s) shall be installed in a single gang ring with square box. Plug-in connectors shall be provided for connections. The EPS156 shall be UL® 1069 Listed to the latest standards.

Contractor shall observe all local and national electrical and building codes.

Do You Need Assistance?

Our trained sales team can answer your questions right away!
Alpha Communications®
42 Central Drive  |  Farmingdale, NY 11735-1202
Phone: (631) 777-5500  |  (800) 666-4800  |  Fax: (631) 777-5599
Copyright© 1996-2020 Alpha Communications™. All rights reserved.
The information contained in this website is supplied by Alpha Communications® as general information and a service to our customers and potential customers. While we endeavor to supply accurate information, we can take no responsibility for errors or misinterpretations in any of the content of this site. We also reserve the right to remove or change any information and/or documentation from this site where legal requirements are contravened or where complaints are received and upheld. Due to continuous product improvement, all colors, sizes, materials, finishes, model numbers and specifications are subject to change without notice. In order to assist existing customers with older model and discontinued products, this web site also contains information about special-order, discontinued products, and products that may no longer be available, for reference purposes only. Please check with our sales or customer service dept. to determine the availability (and proper wiring) of any products, before quoting, specifying and/or purchasing any products. Except in the case of third-party material reproduced on this site, the information and all content, including logos and artwork, provided herein is protected under the U.S. and Foreign Copyright Laws and may not be copied, reproduced or retransmitted by any means, electronically or otherwise, without the express written permission of Alpha Communications®.