AlphaLinQ™ 100 Series Controller Unit
ALPHALINQ 100 CONTROLLER UNIT
Manuals & Diagrams
Architects & Engineer's Specs
The Annunciator Control Unit(s) shall be shall be Alpha Communications® AlphaLinQ™ 100 series model AC152, or approved equal. The AC152 shall provide power and control circuits to operate the audible and visual signals for emergency and routine calls of a complete nurse-call system. Routine calls shall be indicated by a steady light and slowly repeating tone signal. The control unit shall automatically cancel the normal audible signal during intercom use. The unit shall contain all of the electronic circuitry needed for the features mentioned above. The AC152 shall support up to 1 amp of current load from field devices. It shall also support interconnection of a secondary power supply to increase the output current to 3 amps (using an auxiliary Power Supply). Routine and emergency common lines shall be protected against shorted connections.
The AC152 shall also feature a built-in battery charging circuitry, and a Form 'C' dry contact relay which will activate when system calls are placed.
The AC152 shall be mountable right to the surface of the wall or in the optional model CEC152 U.L.® Listed junction box cabinet. The AC152 shall be UL® 1069 Listed to the latest standards.
Contractor shall observe all local and national electrical and building codes.