Product Specification Sheet APS992

Rev. 05/2016

D- CAM-GB2 Camera Adder Module for GB2 System

Architects' And Engineers' Specifications

The GB2 series four (4) camera add-on module(s) shall be Alpha Communications┬« / Golmar D-CAM-GB2, or approved equal. The D-CAM-GB2 shall be used to add up to two (2) of the CAM-GB2 external cameras and up to two (2) of the AHD-2812BA external cameras on a GB2 series system.

Contractor shall observe all local and national electrical and building codes.

D- CAM-GB2 Camera Adder Module for GB2 System

The Alpha Communications® / Golmar D-CAM-GB2 Four (4) Camera Add-on Module is used exclusively with the GB2 series systems. The D-CAM-GB2 allows up to two (2) of the 2-wire CAM-GB2 external cameras and up to two (2) of the coax type AHD-2812BA external cameras.

In a GB2 system, you only need a single D-CAM-GB2 for all users, thus reducing the overall system cost. No additional power supply is required for the D-CAM-GB2 unit.

  • Only one (1) D-CAM-GB2 required per GB2 system to add up to four (4) external cameras
  • Uses simple coax wiring for AHD-2812BA cameras (MAX. 2)
  • Uses simple 2-conductor non-polarized (loop) wiring for CAM-GB2 cameras (MAX. 2)
Dimensions: 2.84"W (73mm) x 3.95"H (101mm) x 2.37"D (61mm). 
GB2 Wiring Information
The GB2's system uses simple 2-conductor non-polarized wiring making it ideal for new installations as well as for retrofit applications. All audio, video and data functions are fully digital and using the RAP-2150 (or equivalent) cable you can run up to 300 meters from the entrance panel to the furthest monitor.
Alpha Communications
42 Central Drive • Farmingdale • NY • 11735-1202 • Phone: (631) 777-5500 • Fax: (631) 777-5599
TOLL-FREE: (800) 666-4800 • Web: • Email:
Copyright© 1998-2020 Alpha Communications® - All Rights Reserved.
Due to continuous product improvement, all colors, sizes, materials, finishes and specifications are subject to change without notice.