The CA-USBSERV10 shall be USB1.1,2.0,3.0, EIA/TIA RS-232 compliant, and shall come with a convenient 3 foot cable. The CA-USBSERV10 shall be bus powered and shall be true bidirectional, plug and play type.
Contractor shall observe all local and national electrical and building codes.
The Alpha Communications® CA-USBSERV10 AlphaEntry™ Serial to USB Adapters are designed to be used with a variety of AlphaEntry™, QwikBUS™ and other hardware components that have a 9-pin 'Din' serial connector and need to connect to a PC's USB connector, when a serial connector is not available.
The CA-USBSERV10 device provides a simple and easy way to connect Universal Serial Bus (USB) into Serial port interfaces. With the advantage of a USB port, users have the capability to utilize the peripheral with serial port interface in an easy to use environment such as plug and play & hot swap function(s). This adapter is designed with a data transfer rate of up to 3Mbps.
300-921,600bps (up to 3Mbps by using alising)
|Current Draw:||Static: less than 80mA. Dynamic average: less than 150mA
|Working Temperature:||-4°F to 140°F (-20°C to 60°C)
TX, RX, RTS, CTS, DTR, DSR, RI and GND