Product Specification Sheet APS882

Rev. 04/2015

TA105SSI Panel Concierge Handset Module

This Specsheet is for a product which is discontinued. Please contact us for alternative products.

Shown without mounting holes

Architects' And Engineers' Specifications

The panel concierge handset module(s) shall be Alpha Communications® TA105SSI , or approved equal. Handset(s) shall be heavy-duty 'pay-phone' type ABS Black handsets with 26" (660mm) long 'armor' cord. Handset(s) shall have the proper speaker  components for the intercom amplifier for which they are being used. Handset mounting module(s)/backplate(s) shall be 16 gauge hi-carbon Stainless Steel. Handset shall sit onto Black Plastic 'live-hook' type cradle. The TA105SSI shall provide 'simplex' type voice communications. 

ADD FOR OPTIONAL CALL-DOWN SIGNAL FROM APT. STATIONS TO PANEL: Contractor shall furnish and install a model R2007I electronic AlphaTone™ call-down signal to allow apartment stations to signal concierge/doorman panel (on systems with this capability).

Contractor shall observe all local and national electrical and building codes. 

TA105SSI Panel Concierge Handset Module

The Alpha Communications® TA105SSI panel concierge handset modules are designed to be installed onto a flat piece of Stainless Steel, in place of the standard speaker components. The TA105SSI modules are utilized in systems where voice privacy is required at the calling (concierge) panel, in place of the standard open-voice (loud-speaking) type of speaker equipment. The TA105SSI is used on 'simplex' type intercom systems using the IA543 (or older PK543A / PK543(or similar) intercom amplifier. 

The TA105SSI features a heavy duty ABS (Black) pay-phone style handset mounted onto a Stainless Steel faceplate, with an 'armor' cord and plastic 'live' hook style handset cradle. The internal speaker components installed into these handsets is determined by the intercom amplifier with which the handset will be utilized.

TA105SSI modules can be customized for specialty speaker/microphone components and can be made with Push-To-Talk Buttons, standard rubber coiled cords, dead cradle switches, mounted on different types and sizes of mounting plates and are available with optional Grey, White or Beige colored handsets (at extra cost).

  • Heavy Duty ABS (Black) Pay-Phone Style Handset
  • Black Plastic 'Live-Hook' Type Handset Cradle
  • Handset Built onto 16 gauge hi-carbon Stainless Steel
  • 26 Inch (661mm) 'Armor' Cord to Resist Vandalism
  • Exceptional Voice Fidelity
  • 'Simplex' voice (optional 'Duplex' Models Available)
  • Works with a Variety of Apartment Intercom Entry Panels and Systems

Dimensions: Typically made 5.0"W (127mm). Specify actual size and mounting hole configuration needed when ordering.
Options: Grey, White or Beige Colored Handsets, special speaker/microphone components, custom sized backplate or panel modules, 'dead' hook type cradle switch, 'Press-To-Talk' push-button, conventional rubber coil cord and R2007I electronic call-down AlphaTone™ signal.
Alpha Communications
42 Central Drive • Farmingdale • NY • 11735-1202 • Phone: (631) 777-5500 • Fax: (631) 777-5599
TOLL-FREE: (800) 666-4800 • Web: • Email:
Copyright© 1998-2020 Alpha Communications® - All Rights Reserved.
Due to continuous product improvement, all colors, sizes, materials, finishes and specifications are subject to change without notice.