The push button station(s) shall be Alpha Communications® RP-44MWH, or approved equal and shall include a momentary (round) low voltage DPST push button switch.
The station shall be mounted into a standard single gang electrical box (or ring). Three (3) pigtail wires shall be provided for connections. Faceplate shall be White plastic (with mounting screws provided).
Contractor shall observe all local and national electrical and building codes.
The Alpha Communications® model RP-44MWH push button station includes a momentary (round) low voltage DPST push button switch.
The RP-44MWH can be used as an indoor contact device or push button for a variety of systems, requiring either a N/O or N/C type of dry contact. The RP-44MWH features a White Plastic face plate, and mounts on a single gang electric box or plaster ring.
When required the RP-44MWH stations can be made with custom markings such as 'Press to Call', or 'Press to Check-in', etc. When any custom markings are required add the prefix 'X' to the model number, making the custom station a model XRP-44MWH (at additional cost).
Height: 4.50" (114mm)
||Steel City #52171 box with Steel City #52C14 plaster ring, or Alpha Communications® Model IH358 box with IH357 ring, or EXACT EQUAL. Vertical mount.
||White plastic faceplate
||Three (3) pigtail wire connectors