Product Specification Sheet APS834

Rev. 10/2013

FZ151 Inline Fuse Holder and 4 Amp Fuse

NOTE: The FZ151 assembly comes with a 4A fuse supplied.
Architects' And Engineers' Specifications
For each battery backup using the BA001 (or similar) batteries, contractor shall furnish one Alpha Communications® model FZ151 inline fuse holder and 4 Amp fuse, or approved equal.

The FZ151 shall feature a Black thermoplastic fuse holder with spring loaded brass contacts and a 13" Red insulated #16AWG stranded wire. A 4A fuse shall be supplied as well.

Contractor shall observe all local and national electrical and building codes.

FZ151 Inline Fuse Holder and 4 Amp Fuse

The Alpha Communications® model FZ151 inline fuse holder and 4 Amp (model# 50T-4A) fuse is used primarily with our nurse-call and emergency-call systems when using the BA001 (or equivalent) batteries for battery back-up capabilities. 

Typically it can be used with our AlphaEcall™, CM800, DS100, NC110N, NC150N, NC150RNC200N and other similar systems when using the BA001 (or similar) batteries. 

Whenever using the BA001 batteries with a battery charger, it is highly recommended that the FZ151 inline fuse holder and 4 Amp fuse be installed.

Alpha Communications
42 Central Drive • Farmingdale • NY • 11735-1202 • Phone: (631) 777-5500 • Fax: (631) 777-5599
TOLL-FREE: (800) 666-4800 • Web: www.alphacommunications.com • Email: info@alphacommunications.com
Copyright© 1998-2020 Alpha Communications® - All Rights Reserved.
Due to continuous product improvement, all colors, sizes, materials, finishes and specifications are subject to change without notice.