Product Specification Sheet APS831

Rev. 11/2013

SF117/4A EMERGENCY PULL CORD SWITCH

 Shown in STANDBY mode

Shown in ACTIVATED mode

NOTE: Our exclusive 'Red Indicator' turns RED when a call is placed, without the need for costly LEDs or additional wiring or additional power.

Architects' And Engineers' Specifications

The Emergency Call switch(es) shall be Alpha Communications® model SF117/4A or approved equal with pull cord operated switch, mounted on a durable ABS plastic faceplate marked "EMERGENCY". Signaling for assistance shall only require a short pull in any direction on the 6' nylon cord. Canceling the call shall be possible only at the point of origin. Unit shall mount on single-gang electric "gem" box or plaster ring. The SF117/4A the shall have a RED 'Call-Placed' Flag Indicator which gives positive visual assurance when a call is placed, without the need for any additional power or station wiring. Pull cords without a RED 'call placed' flag indicator shall not be acceptable.

The Emergency Call switch may be used with 'stand-alone' low-voltage emergency systems, or the AlphaEcall™ and/or QwikBUS™ series systems(s), or equivalent.

Contractor shall observe all local and national electrical and building codes.

SF117/4A EMERGENCY PULL CORD SWITCH

The Alpha Communications® SF117/4A Emergency Pull Switch features a rugged, long-life, positiveacting switch mounted on a durable ABS plastic faceplate. Signaling an emergency requires just a short pull on the 6' long nylon cord, in any direction. The signal cannot be canceled except at the point of origin.

The SF117/4A provides four (4) circuits to operate 1-4 signaling devices, such as a remote annunciator lamp, and a corridor dome lamp, as well as signaling circuits to operate additional options such as floor bell(s) and individual apartment electric door openers, as required.

The SF117/4A features a rugged, long-life, positiveacting switch mounted on a flame retardant type ABS plastic faceplate marked "EMERGENCY" in Black lettering. In addition, the SF117/4A features our 'Exclusive' RED 'Call-Placed' Flag Indicator which gives positive visual assurance when a call is placed, without the need for any additional power or station wiring.

Specifications

Dimensions:

Height: 4.50" (114mm) (less cord)
Width: 2.75" (70mm)
Depth: 1.50" (38mm) (into wall)

Faceplate: White ABS plastic.
Switch: SF117/4A - 4PDT (with Flag Indicator) Switch rating: 125V, 2A
Connection:
Pigtail wire leads
Mounting: Standard single-gang electrical box
Marking: "EMERGENCY" in Black Letters 
Cord Length: 6 foot long (can be shortened in the field), made of durable Nylon
Alpha Communications
42 Central Drive • Farmingdale • NY • 11735-1202 • Phone: (631) 777-5500 • Fax: (631) 777-5599
TOLL-FREE: (800) 666-4800 • Web: www.alphacommunications.com • Email: info@alphacommunications.com
Copyright© 1998-2020 Alpha Communications® - All Rights Reserved.
Due to continuous product improvement, all colors, sizes, materials, finishes and specifications are subject to change without notice.