Product Specification Sheet APS795

Rev. 05/2018

EK119 / EK119B Emergency-Call (Call for Assistance) Kit(s)

NOTE: Image shown is with Pull Cord Station Activated

Architects' And Engineers' Specifications

The Emergency (Call for Assistance) kit(s) shall be Alpha Communications┬« EK119 (without buzzer) or EK119B (with buzzer/horn) or approved equal. Dome lights shall include a translucent plastic cover mounted on a flame retardant ABS plastic panel, and shall mount over a conventional 1 or 2-gang electrical back box. Dome lights shall feature Hi-Brightness LEDs to eliminate costly bulb replacement, and minimize downtime.

The Emergency Call switch shall be mounted on a durable ABS plastic faceplate marked "EMERGENCY". Signaling for assistance shall only require a short pull in any direction on the 6' nylon cord. Canceling the call shall be possible only at the point of origin. Unit shall mount on single-gang electric "gem" box or plaster ring., and shall feature a RED 'call placed' Indicator when activated.

The built-in buzzer/horn (in the EK119B kits) shall sound as long as the dome light is lighted (activated).

Contractor shall observe all local and national electrical and building codes.

EK119 / EK119B Emergency-Call Kits

The Alpha Communications┬« EK119 and EK119B Emergency-Call Kits are the ideal solution for a stand-alone 'Call for Assistance' applications where an emergency switch is required. Typically these kits are ideal for use in health care facilities, public rest-rooms (toilets) and handicapped areas. These new and improved kits now feature Dome Lights with Hi-Brightness White LEDs so there is no need for costly bulb replacements!

The model EK119 consists of:

  • 1- SF119/2A Emergency Pull Cord station (RED Indicator style)
  • 1- SS106 24VAC (U.L Listed) pigtail Transformer
  • 1- CDL101LED Corridor Dome Light (LED type - without a buzzer).

The model EK119B consists of

  • 1- SF119/2A Emergency Pull Cord station (RED Indicator style)
  • 1- SS106 24VAC (U.L Listed) pigtail Transformer
  • 1- CDL123B Corridor Dome Light (LED type - without a buzzer).
Features
  • Ideal for 'Toilet Alarm' or other Stand-Alone application
  • Hi-Brightness White LEDs - No Bulb Replacement!!
  • Safe - Low Voltage Wiring
Dome Light Specifications
Dimensions: Height: 5.20" (133mm)
Width: 4.55" (116mm)
Projects: 3.50" (89mm) from mounting surface
AC Current: EK119: 24VAC, 10mA
EK119B: 24VAC, 170mA
Mounting: Fits standard 1 or 2-gang box. Minimum depth of box to be no less than 1.75".
Finish: Translucent white plastic cover mounted on a flame retardant, fog white ABS plastic panel.
Pull Cord Specifications
Dimensions:

Height: 4.50" (114mm) (less cord)
Width: 2.75" (70mm)
Depth: 1.50" (38mm) (into wall)

Faceplate: White ABS (flame retardant) plastic.
Connection:

Pigtail wire leads (2 separate sets of 2 leads)

Mounting: Standard single-gang electrical box
Marking: "EMERGENCY" in Black Letters
Call Placed Notification: Sliding Red Window Type
Alpha Communications
42 Central Drive • Farmingdale • NY • 11735-1202 • Phone: (631) 777-5500 • Fax: (631) 777-5599
TOLL-FREE: (800) 666-4800 • Web: www.alphacommunications.com • Email: info@alphacommunications.com
Copyright© 1998-2020 Alpha Communications® - All Rights Reserved.
Due to continuous product improvement, all colors, sizes, materials, finishes and specifications are subject to change without notice.