Product Specification Sheet APS775

Rev. 07/2013

RC-SZENA Wall Mount Connector for Szena Monitor (Golmar)

RC-SZENA

Wall Mount Connector for Szena Video-intercom Station

Angled side view shown

Architects' And Engineers' Specifications

The Szena Wall Mount Connector(s) shall be Alpha Communications® / Golmar RC-SZENA, or approved equal. Wall mount connector(s) shall mount right onto the surface of the finished wall, and shall contain positive (barrier type) screw terminal connectors for wiring.

When flush mounting the Szena monitor(s) customer shall also furnish and install the required model CE-SZENA flush housing (in addition to the RC-SZENA connector).

Contractor shall observe all local and national electrical and building codes.

RC-SZENA Wall Mount Connector for Szena Video-intercom Station

The Alpha Communications® / Golmar RC-SZENA Szena Wall Mount Connector is to be used with the Szena apartment video-intercom station units for surface wall mounting (or flush mounting when used in addition to the CE-SZENA flush back box).

Made of rugged plastic, the RC-SZENA features easy wall mounting tabs and positive (barrier type) screw terminal connectors.

Features
  • Rugged plastic
  • Adjustable mounting hole tabs
  • Built-in positive (barrier type) screw terminal connectors
  • Can be Surface mounted (or optionally flush mounted using the CE-SZENA flush back box)
Specifications
Dimensions:  2.875"W (74mm) 6.375"H (162mm) 0.75"D (20mm) from finished wall surface
Flush Housing:  Model CE-SZENA. Use in addition to the RC-SZENA connector. OPTIONAL.
Alpha Communications
42 Central Drive • Farmingdale • NY • 11735-1202 • Phone: (631) 777-5500 • Fax: (631) 777-5599
TOLL-FREE: (800) 666-4800 • Web: www.alphacommunications.com • Email: info@alphacommunications.com
Copyright© 1998-2020 Alpha Communications® - All Rights Reserved.
Due to continuous product improvement, all colors, sizes, materials, finishes and specifications are subject to change without notice.