The Telephone Auto Dialer Unit unit(s) shall be Alpha Communications® / Cornell model TAK-4208, or approved equal. The TAK-4208 shall be used in conjunction with an Alpha Communications® Emergency-Call (or similar) notification system, for up to eight (8) inputs.
The TAK-4208 shall be a fully programmable auto dialer and digital announcer, designed for message notification. Once a contact input is detected, the TAK-4208 shall dial up to eight (8) phone numbers and play a prerecorded message of up to one (1) minute in length.
Low voltage wiring shall be used and positive screw terminal and plug-in connectors shall be provided for installation wiring. The TAK-4208 shall be mountable right to the surface of the wall or in a customer-supplied junction box cabinet, and shall require a customer supplied external phone line and jack.
Contractor shall observe all local and national electrical and building codes.
The Alpha Communications® / Cornell TAK-4208 is a fully programmable auto dialer and digital announcer, designed for message notification. Once an alarm contact is actuated, the TAK-4208 can dial up to eight (8) phone numbers and play a pre-recorded message up to one (1) minute in length.
Messages can be recorded locally or remotely. When configured as an alarm dialer, the TAK-4208 has call progress detection capability with normal and fast busy, call pickup, CPC, and ring-to-answer detection.
Programming can be done with a touch tone phone, or by using a PC with a serial port connection and the supplied software. The TAK-4208 comes with the required 12VDC plug-in power supply, and has up to eight (8) inputs.
Height: 6.30" (161mm)
|Construction:||Black painted metal case|
|Connections:||Positive screw terminal and plug-in connectors|
|Mounting:||Surface-mounted (usually installed near the other system central equipment).|