Product Specification Sheet APS750

Rev. 07/2013

EL562 Twisted-Pair Video Receiver Module (Golmar)

Architects' And Engineers' Specifications

The Twisted Pair Video Receiver(s) shall be Alpha Communications® / Golmar EL562, or approved equal. EL562 shall be mounted inside the appropriate video-intercom station. 

Unit(s) shall be used to convert the digital video signal being sent to a conventional twisted pair video signal.

The EL562 module(s) shall have positive screw terminal connectors and shall also be provided with a jumper for video termination as required for each riser/line.

Contractor shall observe all local and national electrical and building codes.

EL562 Twisted Pair Video Receiver

The Alpha Communications® / Golmar EL562 Twisted Pair Video Receiver is a compact, assembly that mounts into a variety of video-intercom stations, in order to convert the digital video signal being sent to a conventional twisted pair video signal.

Typically, the EL562 mounts behind the video-intercom monitor, by plugging into a small opening in the back of the monitor. A provided jumper on the EL562 allows for video termination at the end of a riser/line, as required.

  • Compact design mounts behind video-intercom station
  • Positive screw terminals connectors
  • Comes with a jumper for video termination as required
  • Works with a variety of video-intercom stations
Alpha Communications
42 Central Drive • Farmingdale • NY • 11735-1202 • Phone: (631) 777-5500 • Fax: (631) 777-5599
TOLL-FREE: (800) 666-4800 • Web: • Email:
Copyright© 1998-2020 Alpha Communications® - All Rights Reserved.
Due to continuous product improvement, all colors, sizes, materials, finishes and specifications are subject to change without notice.