The ECD2 shall easily plug onto the polarized connector of the associated FSE1500 or VFSE1500 QwikBUS™ station's pc board, and shall provide one or two dry contact inputs to signal a call or event on the associated AlphaEntry™ (v3.0 or later) Master Station(s).
Contractor shall observe all local and national electrical and building codes.
The Alpha Communications® / S.T.R.™ ECD2 QwikBUS™ Dual Input Wiring Harness Connectors are designed to be used in conjunction with the FSE1500 series QwikBUS™ intercom/emergency stations and VFSE1500 series video-intercom/emergency stations. When the ECD2 harness is plugged into the FSE1500 or VFSE1500 station's PC board auxiliary connection it allows up to two (2) dry contact closures to trigger a call (or event) on the QwikBUS™ system, by means of the connected AlphaEntry™ (v3 or later) PC Master Station(s).
Typically these inputs can be a momentary or latching contact using such devices as Emergency Pull Cords, Smoke Detector (relays), Heat Detectors, Wireless Pendants, Panic Buttons, Water sensors, Motion Sensors, and many more.
The signaling type and display are fully user programmable at each associated AlphaEntry™ (v3.0 or later) Master Station location, and these calls/events can trigger other relays, devices, text messages, emails, etc.
|Connectors:||Positive Screw terminal type for dry contact inputs. Polarized plug-in connector on other end to connect to the pc board on the FSE1500 or VFSE1500 station|
|Mounting:||Mounts inside the wall behind the associated FSE1500 intercom / emergency station or VFSE1500 video-intercom / emergency station.