The intelligent translator(s) shall be Alpha Communications® / S.T.R.™ QwikBUS™ model TL333, or approved equal. The TL333 shall be built into a rugged high impact ABS plastic case, and shall be used with the associated QwikBUS™ and AlphaEntry™ system software (v3.0 or later) and hardware.
Low voltage wiring shall be used and positive screw terminal and plug-in connectors shall be provided for installation wiring. The TL333 shall be mountable right to the surface of the wall or in a customer supplied junction box cabinet. The TL333 shall be powered by the required model SS12P 12VDC plug-in power supply unit.
Contractor shall observe all local and national electrical and building codes.
The Alpha Communications® / S.T.R.™ TL333 intelligent translator is used only with the QwikBUS™ series systems for interfacing to AlphaEntry™ series Master Stations or other AlphaEntry™ system components.
Each TL333 is powered by the required model SS12P 12VDC plug-in power supply and connects to the 2-wire QwikBUS™ 'bus' wiring by means of positive screw terminal connectors. There is a 9-pin 'Din' type RS232 (serial) connector which connects to the serial port of a PC which is running AlphaEntry™ software (v3.0 or later), or to the PC's USB connector by means of a model CA-USBSERV10 serial to USB adapter cable assembly.
|Dimensions:||Height: 3.50" (89mm)
Width: 3.50" (89mm)
Depth: 1.25" (32mm) from mounting surface
|Construction:||High impact ABS plastic case|
|Connectors:||Positive screw terminal and plug-in connectors|
|Voltage Requirements:||9VDC to 12VDC|