The Power Supply unit(s) shall be Alpha Communications®/Comelit SimpleBUS model 1195/U, or approved equal. The 1195/U shall be built into a rugged high impact Light Grey ABS plastic case, and shall be powered a contractor supplied power cord.
Low voltage wiring shall be used and positive screw terminal and plug-in connectors shall be provided for installation wiring. The 1195/U shall be mountable right to the surface of the wall or in a customer-supplied junction box cabinet.
Contractor shall observe all local and national electrical and building codes.
The Alpha Communications®/Comelit 1195/U Power Supply is used to provide component power for the 2-wire SimpleBUS series intercom and/or video-intercom system devices. The 1195/U provides the regulated power needed to control some of the components on a SimpleBUS system.
Each 1195/U gets its power from a customer supplied power cord, and will operate on an input of 120VAC.
Each 2-wire SimpleBUS system requires a minimumof one 1195/U Power Supply
Height: 3.75" (96mm)
||High impact Light Grey ABS plastic case
||Positive screw terminal and plug-in connectors|
Primary: 120VAC (50 - 60 Hz.)
|Mounting:||Surface-mounted (usually installed near the 4888CU mixer power supply and other system central equipment).|