The Wireless Support Module(s) shall be Alpha Communications® / TekTone SF528 or approved equal. When the SF528 is connected to the SF340B Emergency Station, the SF340B shall operate as a wireless device when used with the Tek-CARE®500 (TC500) Emergency Call System. The SF528 shall use the 900 MHz frequency for signal transmission. The SF528 shall include a 7-pin wiring harness for connection to the SF340B Emergency Station. The SF528 shall require no other wiring connections and shall be powered by a 3V lithium battery.
TekTone® has designed the Tek-CARE®500 (TC500) to work as a system. Its NC501 Master Station Computer has been carefully designed and matched to work with Tek-CARE®500 wireless and wired peripherals. TekTone® will not warrant or support components of Tek-CARE®500 that are purchased separately unless the components are add-ons to previously sold systems. TekTone® will also not warrant or support a system that is a mix of TekTone® and Non-TekTone® parts, unless prior written permission has been obtained. In order to track our systems and to inform facilities of software upgrades, full site information (site name, address and phone number) will be required when ordering. Site information and NC501 warranty number will also be required when requesting technical support.
The SF528 is based on Frequency Agile® spread spectrum technology and transmits signals at the 900 MHz frequency. It includes a universal transmitter and a pre-assembled 7-pin wiring harness for connection to the SF340B Emergency Station. The SF528 requires no other wiring connections and is powered by a user-replaceable 3V lithium battery.
Height: 3.60" (92mm)
||Attractive, flame retardant ABS plastic|
||Plastic single-gang box|
||3V Lithium (model # BA505)|