Product Specification Sheet APS446

Rev. 02/2017

CHC Series Corner Mount Camera Housings - Less Cameras

Model CHCSS Shown

Dimensions

7.50"W (191mm) x 5.75"H (147mm) x 3.75"D (96mm) 
(FROM FRONT OF UNIT)

Architects' And Engineers' Specifications

The compact corner camera housing(s) shall be Alpha Communications┬« CHC series or approved equal. Housing(s) shall be made of Stainless Steel (CHCSS) or Polished Brass (CHCBR) or painted White (CHCWH). Stainless Steel model shall be made of vandal-resistant 16 Gauge HighCarbon Stainless Steel. Housing(s) shall provide access holes from the top and rear, and shall protect the camera by means of six (6) tamper-resistant screws to fasten the cover to the rear assembly. When a built-in B&W camera (with plug-in power supply included) is required, add the suffix '/BW' to the model numbers shown above.When a built-in COLOR camera (with plug-in power supply included) is required, add the suffix '/COL' to the model numbers shown above.The inside of housing shall be painted black (powder coat).

Contractor shall install as per manufacturers instructions and shall observe all local and national building codes and regulations as well as all codes concerning video surveillance.

CHC Series Corner-Mount Camera Housings

The Alpha Communications┬« CHC series Corner Mount Camera Housings are designed to protect the installed camera against vandalism or theft, while providing an attractive and compact camera housing. Three (3) standard finishes are available in Brushed Stainless Steel (CHCSS), Polished Brass (CHCBRor painted White (CHCWH). Custom painted finishes are also available (at extra cost).

Simply add you own mini camera, or order with a built-in B&W camera (add suffix/BW) or COLOR camera (add suffix /COL) and you have an attractive, high security camera/housing unit, ideal for elevators, hallways, offices, lobbies, etc.

Compare to some of our competitor's housings and this is what you'll find... their housings use a small key lock to protect the camera from theft. Inserting a screwdriver and a quick snap, the lock gives way, and the housing is open. Our housing requires that the potential thief take the time to remove six (6) tamper resistant screws, before the camera can be stolen!

Standard Features
  • Fully Adjustable Left/Right/Up/Down Camera Bracket Gimbal
  • Polycarbonate Protective Camera Window
  • Six (6) Security Screws protect the camera
  • 16 Gauge High-Carbon Stainless Steel (model CHCSS)
  • Access holes from the Top and Rear
  • Can mount in Corner or to Ceiling
  • Custom Colors Available (at extra cost)
  • Available WITH or WITHOUT optional Built-in (B&W or COLOR) Camera
  • Inside of Housing is Painted Black (powder coat)

 

Model CHCBR Shown Model CHCWH Shown
Alpha Communications
42 Central Drive • Farmingdale • NY • 11735-1202 • Phone: (631) 777-5500 • Fax: (631) 777-5599
TOLL-FREE: (800) 666-4800 • Web: www.alphacommunications.com • Email: info@alphacommunications.com
Copyright© 1998-2020 Alpha Communications® - All Rights Reserved.
Due to continuous product improvement, all colors, sizes, materials, finishes and specifications are subject to change without notice.