Product Specification Sheet APS389

Rev. 07/2013

62927 Emergency Call Remote Substation

This Specsheet is for a product which is discontinued. Please contact us for alternative products.
Architects' And Engineers' Specifications

The Security Intercom Outdoor Remote Station(s) shall be Alpha Communications® / Stento model #62927 or approved equivalent. The weather and tamper resistant station is 5.50" H x 7.50" W x 2.50" D with a 3" square speaker. The station shall have a large Red 1.50" round "mushroom" push button. 

The station shall require 2 twisted pair #24AWG to exchange loop. The station shall be flush mount on #6297 box, surface mount on #6298 (interior) box or #62991 (exterior) box. The station is ideal for security applications. The #62927 security intercom station will operate on all Stento AlphaCom, CRT or CRM series intercom systems.

Contractor shall observe all local and national electrical codes.

62927 Security Intercom Outdoor Remote Station

The #62927 is a rugged, weather and tamper resistant intercom remote substation with a large red call-in button that is easily pressed by an elbow or shoulder. Call-in can be programmed as an emergency call to a Control Room Master (CRM), AlphaCom or Call Handler System (CRT). The remote station has a unique design to protect the speaker, microphone, LED and internal electronics from moisture and external abuse. The remote station, which is extremely rugged and provides excellent sensitivity and voice reproduction, is ideal for security applications in parking garages, stairwells, campus walkways, entry doors, gates, and police stations.

  • Instant contact. . .in seconds
  • Large Red "Mushroom" Button
  • Rugged .25" machined metal
  • No-penetration speaker grill
  • Clear, crisp sound quality
  • Weather resistant components
0.25" machined, anodized, brushed aluminum, moisture gasket

5.50" H x 7.50" W x 2.50" D
(139.7mm x 190.5mm x 63.5mm)

3" Square, 45 ohm, 1 watt water resistant
Push Button:
Large, Red, 1.50" round, machined aluminum
LED behind translucent red epoxy bonded lexan lens
Four (4) 10" pigtails
LED call placed, or call connect, indicator is a system option
Requires 2 twisted pair #24AWG to exchange loop. (Loop resistance not to exceed 240 ohms)

Flush mounts on #6297 box, surface mount son #6298 (interior) box or #62991 (exterior) box.
(Mounting screws not provided)

Alpha Communications
42 Central Drive • Farmingdale • NY • 11735-1202 • Phone: (631) 777-5500 • Fax: (631) 777-5599
TOLL-FREE: (800) 666-4800 • Web: • Email:
Copyright© 1998-2020 Alpha Communications® - All Rights Reserved.
Due to continuous product improvement, all colors, sizes, materials, finishes and specifications are subject to change without notice.