Remote is designed to work with the RM5000EX and/or CB901EX microprocessor intercom systems. When used as a elevator remote station, calling to the AND16 series annunciator, each SS900B requires the contractor to furnish and install a model AN912 annunciator control module.
Contractor shall observe all local and national electrical and building codes.
The SS900B remote station has been designed and manufactured with high reliability for long term usage and ease of installation.
The unit is supplied mounted on a back plate of high quality 16 gauge nominal, cold rolled steel (CRS). The SS900B is provided with ametal screen mesh to protect the speaker and microphone and a protective rear cover that is notched for cable entry. The SS900B's PC board is treated with an anti-corrosive compound which is resistant to water and chemical penetration. The Unit can easily be mounted behind a four (4) inch speaker grille/baffle.
Width: 5.75" (147mm)
Height: 5.00" (127mm)
Depth: 1.75" (45mm)
||24VDC +/- 20%
|Maximum Power Consumption:
||Approx. 5 Watts
||0.2 Watts (2.0 Watts with extra 45 ohm speaker)
||+/- 5 dB (internal adjustment)
|Extra Loudspeaker Impedance Recomm:
||16 to 50 ohms|