Product Specification Sheet APS220

Rev. 07/2013

9620 Tamper-Resistant Remote Substation

This Specsheet is for a product which is discontinued. Please contact us for alternative products.
Architects' And Engineers' Specifications
This B&W miniature camera(s) shall be Alpha Communications® model CCD-375 or approved equivalent. Camera(s) shall feature a 1/3" CCD image sensor, and shall require only .05 lux. Camera(s) shall use standard 16 mm "C" or "CS" mount lenses and provide more than 400 lines of resolution. Camera shall operate on a temperature range of 0 F to 140 F (-18 C to 60 C), and is designed for indoor use (unless installed in a proper outdoor housing). Camera(s) shall feature an electronic shutter operating at 1/60 - 1/100,000 second, with automatic adjustment. Camera can be mounted from top or bottom, and shall operate on 8 VDC - 14 VDC power. 

Contractor shall observe all local and national electrical codes.

Check with applicable authorities regarding local and federal laws as they apply to party consent and video and/or audio recording.

9620 Tamper-Resistant Substation

The #9620 is a rugged tamper resistant substation with a unique design to protect the speaker, call button, and internal electronics from external abuse. The station is ideal for jail cells, prison day rooms, sally-ports, parking garages, and other high-security applications. The speaker provides good microphone sensitivity and excellent voice quality. It provides clear, hand-free, two-way communication when called. The station provides a balanced audio line with no hum and no noise, and provides circuitry for line supervision. The #9620 will operate on all of the 9600 series intercom systems.

  • Clear two-way communication
  • Rugged stainless steel faceplate
  • No-penetration speaker grille
  • Heavy duty call in button
  • Fits standard 3-Gang (deep) masonry backbox
  • Allows line supervision
  • Simple to install

11 gauge, #304 stainless steel
4.50" H x 6.30" W x 2.50" D
(115mm x 161mm x 64mm)
45 Ohm, 2" x 3" oval, 1 watt, moisture treated
Push Button:
1" round heavy duty, machined brass, nickel plated. Snap action switch with wiping gold plated contacts.
Screw terminals
Requires 1 twisted pair #22 AWG to master. Loops resistance not to exceed 100 ohm
Standard 3 gang, deep, masonry box (by others). (Mounting screws not included)
Alpha Communications
42 Central Drive • Farmingdale • NY • 11735-1202 • Phone: (631) 777-5500 • Fax: (631) 777-5599
TOLL-FREE: (800) 666-4800 • Web: • Email:
Copyright© 1998-2020 Alpha Communications® - All Rights Reserved.
Due to continuous product improvement, all colors, sizes, materials, finishes and specifications are subject to change without notice.