Product Specification Sheet APS216

Rev. 07/2013

9685 Paging Adapter (9600 Series)

This Specsheet is for a product which is discontinued. Please contact us for alternative products.
Features
  • Allows direct access paging
  • Matches input of most amplifiers
  • Relay control of amplifiers
  • Allows alert chime tone
  • Rugged construction
Architects' And Engineers' Specifications
The Paging Adapter shall be Alpha Communications® / Stento model #9685 or approved equivalent. The adapter shall be housed in ABS plastic box and cover, finished in Black and be 3.75" H x 6.50" W x 1.35" D. The adapter shall require 1 pair twisted #22 AWG from system MDF, 2 pair twisted #22 AWG to amplifier and 1 pair #22 AWG for power. The adapter shall be mounted near MDF or near amplifier and shall require 24 VDC power supply. 

A #9685 is required for each zone or paging amplifier to be accessed. The #9685 unit will operate on all 9600 series intercom systems.

Contractor shall observe all local and national electrical and building codes.

9685 Paging Adapter (9600 Series)
The Alpha Communications® #9685 is an amplifier interface unit that allows a 9600 series intercom system to be connected to an overhead paging system. The adapter is accessed by pressing the direct access button, on the 9600 series master, that is assigned to the paging adapter. This will sound a chime tone, and voice paging is allowed by pressing the PTT button on the intercom master. The intercom all call and group call features can also be used to initiate a page through this adapter. A #9685 is required for each zone or page amplifier to be accessed. The unit will operate on all 9600 series intercom systems.
Specifications
Housing:
ABS plastic box and cover, Black finish
Dimensions:
3.75" H x 6.50" W x 1.35" D (96mm) x (166mm) x (35mm)
Relay:
24VDC @ 10 mA with 1 amp form "C" contacts (NOTE: Normally relay pulls when interface is selected. Jumper option may allow relay to pull only with PTT button on master - when used with MMU)
Output:
600 ohm, up to 1 V, transformer isolated
Power:
Requires 24VDC, 10 mA
Connectors:
Positive screw terminals
Cabling:
1 pair twisted #22 AWG from system MDF, 2 pair twisted #22 AWG to amplifier, 1 Pair #22 AWG for power
Mounting:
Wall mount near MDF, or near amplifier
Alpha Communications
42 Central Drive • Farmingdale • NY • 11735-1202 • Phone: (631) 777-5500 • Fax: (631) 777-5599
TOLL-FREE: (800) 666-4800 • Web: www.alphacommunications.com • Email: info@alphacommunications.com
Copyright© 1998-2020 Alpha Communications® - All Rights Reserved.
Due to continuous product improvement, all colors, sizes, materials, finishes and specifications are subject to change without notice.