Product Specification Sheet APS212

Rev. 07/2013

9627 Elevator Car Remote Substation

This Specsheet is for a product which is discontinued. Please contact us for alternative products.
Architects' And Engineers' Specifications
The Elevator Car Remote Substation shall be Alpha Communications® / Stento model #9627 or approved equivalent. The substation shall be 8.0" H x 4.0" W x 1.9" D, with hidden mounting studs and the screw holes shall be 7.5" H x 3.5" W x 0.1875" D. The substation loudspeaker shall be 3.0" round and capable of 3 watt output. The substation requires 1 twisted pair #22 AWG from system MDF and requires 2 pairs if optional LED is included. Mounting shall be done by elevator company, requiring holes in car operating panel for speaker and LED. The #9627 will operate on all 9200 and/or 9600 series intercom systems.

Contractor shall observe all local and national electrical and building codes.

9627 Elevator Car Remote Substation
The Alpha Communications® #9627 is an intercom remote substation designed to be mounted behind the Car Operating Panel by the elevator company. It is the functional equivalent of a standard #9620 remote substation, but without a faceplate. The substation includes a 3" speaker with acoustic baffle, an LED, (optional) an electronic board, and mounting subplate. The board provides circuitry for either momentary and/or maintained contact call-in button (provided by elevator company). The substation allows clear, hands-free, two-way communication and paging inside an elevator car. Board includes screwdriver adjusted speaker volume control. The #9627 will operate on all 9200 and/or 9600 series intercom systems.
Features
  • High-fidelity loudspeaker
  • Ultra-sensitive speaker/microphone
  • Designed for elevator use
  • Clear "Hands-Free" operation
  • Assembled for easy mounting
Specifications

Subplate: 8.0" H x 4.0" W x 1.9" D (203mm) x (102mm) x (48mm)
Screw Holes:
7.5" H x 3.5" W x 0.1875" D
Loudspeaker:
3.0" round, 63 ohm, 3 watt, 200-10K hz, 1.76 oz. BF magnet
Connector:
Screw terminals
Cabling:
Requires 1 twisted pair #22 AWG from system MDF (requires 2 pair if optional LED is included)
Mounting:
By elevator company (requires appropriate holes in car operating panel for speaker and LED)

Alpha Communications
42 Central Drive • Farmingdale • NY • 11735-1202 • Phone: (631) 777-5500 • Fax: (631) 777-5599
TOLL-FREE: (800) 666-4800 • Web: www.alphacommunications.com • Email: info@alphacommunications.com
Copyright© 1998-2020 Alpha Communications® - All Rights Reserved.
Due to continuous product improvement, all colors, sizes, materials, finishes and specifications are subject to change without notice.