Product Specification Sheet APS209

Rev. 07/2013

96257 Emergency Call Remote Substation

This Specsheet is for a product which is discontinued. Please contact us for alternative products.
Architects' And Engineers' Specifications
The Emergency Call Remote Station shall be Alpha Communications® / Zenitel model #96257 or approved equivalent. The weather and tamper resistant station is 5.5" H x 7.5" W x 2.5" D with a 3" square speaker. The station shall have a large Red 1.5" round "mushroom" push button. 

The station shall require 1 twisted pair #22 AWG to MDF (plus 2 pair for optional LED). The station shall be flush mount on #6297 box, surface mount on #6298 (interior) box or #6299 (exterior) box. The station is ideal for security applications. The #96257 emergency call station will operate on all Stento 9200 and/or 9600 series intercom systems.

Contractor shall observe all local and national electrical and building codes.

96257 Emergency Call Remote Station
The #96257 is a rugged, weather and tamper resistant intercom remote substation with a large red call-in button that is easily pressed by an elbow or shoulder. Call-in can be an emergency call to a 9200 or 9600 series Control Room Master. The remote station is extremely rugged and provides excellent sensitivity and voice reproduction. The #96257 is ideal for security in parking garages, stairwells, entry doors, gates, and police stations. The #96257 will operate on all 9200 and/or 9600 series intercom systems.
  • Instant contact. . .in seconds
  • Large Red "Mushroom" Button
  • Rugged .25" machined metal
  • No-penetration speaker grill
  • Clear, crisp sound quality
  • Weather resistant components
  • Allows line supervision

0.25" machined, anodized, brushed aluminum, moisture gasket
5.50" H x 7.50" W x 2.50" D (139.7mm x 190.5mm x 63.5mm)
3" Square, 45 ohm, 1 watt water resistant
Push Button:
Large, Red, 1.5" round, machined aluminum
Four (4) 10" pigtails
Metal off-set speaker grill. Electronics and switch are encapsulated
LED call placed, or call connect, indicator is a system option
Requires 1 twisted pair #22AWG to MDF (plus 2 pair for optional LED) (Loop resistance not to exceed 100 ohms)
Flush mounts on #6297 box, surface mount son #6298 (interior) box or #6299 (exterior) box. (Mounting screws not provided)


Alpha Communications
42 Central Drive • Farmingdale • NY • 11735-1202 • Phone: (631) 777-5500 • Fax: (631) 777-5599
TOLL-FREE: (800) 666-4800 • Web: • Email:
Copyright© 1998-2020 Alpha Communications® - All Rights Reserved.
Due to continuous product improvement, all colors, sizes, materials, finishes and specifications are subject to change without notice.