The Master Keyboard Encoder shall be Alpha Communications® / Stento model #1320 or approved equivalent. The encoder shall be made of shatterproof ABS plastic and be 8.0" H x 6.0" W x 2.0" D (204mm x 153mm x 51mm). The encoder shall have ten 15mm buttons including Cancel, Send, and Recall buttons.
The display shall be 18mm x 82mm alphanumeric and have a 2 line display for up to 20 characters. The connector shall be a 25-pin, female "D" connector and shall include 9 feet of cord to the #1340 termination unit. The encoder shall operate up to 100 receivers (pocket pagers) and include up to nine (9) preset messages.
Contractor shall observe all local and national electrical and building codes.
||Shatterproof ABS plastic with Lexan faceplate
||8.0" H x 6.0" W x 2.0" D
||Ten 15mm digit buttons - Including Cancel, Send, and Recall buttons
||18mm X 82mm alphanumeric, 2 line display for 20 characters
||25-pin, female "D" connector. Includes 9 ft. of cord to the #1340 termination unit
||100 addresses, 9 messages (software version .001)|