||Vented ribbed ABS plastic finish in black
||6.0" H x 2.5" W x 1.5" D (140 mm x 60 mm x 40 mm)
||100-240 V, 50 / 60 Hz, 60 watt
||+12VDC, 2.9 amps, 35 watt
||± 1% on output @ full load
||Ripple and noise less than 100 MV
||Six foot cord with 3 prong molded plug
||Six foot cord with 3.5 mm molded plug
The power supplies shall be Alpha Communications® / Stento model #1310 or approved equivalent. The power supply unit(s) shall be housed in vented ribbed ABS plastic with a black finish. The power supply shall be 6.0" H x 2.5"W x 1.5" D. The input for the power supplies shall be 100V-240V and have a 12 VDC output. The AC cord for the power supplies shall be six feet, with three prong molded plug and the DC cord shall be 6 feet, with a 3.5 mm molded plug. The power supply shall be short curcuit and over voltage protected.
Contractor shall observe all local and national electrical and building codes.