The entrance panel(s) shall be Alpha Communications® / TekTone AM190 Series Speaker Panel or approved equal, and shall provide for up to 22 push buttons per module. Panels can be used as stand-alone signaling panels, or in conjunction with AM192 and/or AM193 series panels.
Push button switches shall be individually replaceable plastic type with self wiping contacts. In addition, the panel shall contain up to 22 individual name holders. The name holders shall be made of BLACK flame retardant polycarbonate plastic strips to protect card inserts. Each name holder shall snap into two small slots on the panel itself and shall be individually replaceable.
Each AM190 panel, or approved equal, shall be supplied with name card sheets that may be easily separated into individual name strips. Name strips shall be inserted into name holders without the use of tools.
The panel shall be flush (or surface) mounted and shall be finished in natural anodized aluminum finish, with appropriate panel frame and housing as required.
The Alpha Communications®/TekTone AM190 series push button panels are specifically designed for use with the AM192 series speaker panel and/or AM193 series speaker/microphone panel modules. The AM190 series panels can also be used without any speaker modules, for use as a bell/buzzer type or signaling panel only.
The specific model depends upon the number of additional suites or units to be called. AM190 series panels are available in sizes ranging from 4 to 22 buttons per module.
||Frame Height: 19.00" (483mm). Frame width depends upon number of modules in panel frame.
||Individually replaceable plastic type with self-wiping contacts, with solid extruded (Black anodized) aluminum actuators.
||2.50" (64mm) voice frequency response.
||Modular extruded, anodized aluminum panel with louvered metal speaker grille.
||OH19X series for flush mounting (used in addition to OF19X series frames). For surface mounting, use OF190S series frame (no housing required).|