Product Specification Sheet APS1098

Rev. 05/2018

RY012AM 12VDC Specialty Relay Module

Architects' And Engineers' Specifications

The specialty relay module(s) shall be Alpha Communications® RY012AM or equivalent. Relay shall operate from a 12VDC primary voltage source, and shall provide a 'Form C' dry contact relay output, as long as the 12VDC source is present. All wiring to relay shall be low-voltage Class II wiring, installed as per all federal, state, and local electrical codes. Relay shall surface mount right to the finished wall and shall be installed in a suitable environment that is free from excessive dirt, dust, temperature, humidity, grease and water. Relay can also be mounted behind a calling stations, using the provided mounting holes and cable tie or wire wrap.

Contractor shall observe all local and national electrical and building codes.

RY012AM 12VDC Specialty Relay Module
The Alpha Communications® RY012AM specialty relay modules are used for a variety of reasons. They are primarily used with room calling stations on the AlphaEcall™ 200 series emergency-call systems. It can also be used to provide a 'Form C' relay contact from virtually any 12VDC input source. The RY012AM can even be powered directly from a 12VDC power supply.

As long as a 12VDC source is present, the RY012AM will engage, providing a normally-open and a normally closed set of contacts, with a shared 'common' screw terminal.

The RY012AM relays are designed to easily surface mount right onto the finished wall by means of self-stick mounting tabs (provided by others) or by using the mounting holes provided for screw mounting. Convenient mounting holes also allow these relays to be mounted behind calling devices by means of a cable tie or wire wrap.

Connections are positive screw terminal type, using a barrier type terminal connector strip.

Features
  • Easily Installs Right on Finished Wall Surface or inside of a device
  • Operates on Safe Low-Voltage Class II Wiring
  • Provides a 'Form C' Type Relay Output
  • Convenient Barrier Type Screw Terminal Connections
Model Available
Dimensions:
1.02"W (26mm) x 1.55"H (40mm) x 0.75"D (20mm).
Relay Type:
12.0 Amp (@28V) SPDT Relay with protective cover.
Connections:
Barrier Type Screw Terminal Connectors
Alpha Communications
42 Central Drive • Farmingdale • NY • 11735-1202 • Phone: (631) 777-5500 • Fax: (631) 777-5599
TOLL-FREE: (800) 666-4800 • Web: www.alphacommunications.com • Email: info@alphacommunications.com
Copyright© 1998-2020 Alpha Communications® - All Rights Reserved.
Due to continuous product improvement, all colors, sizes, materials, finishes and specifications are subject to change without notice.