The Emergency Pull station(s) shall be Alpha Communications® / Cornell E-114-3, or approved equal with latching pull cord operated switch, mounted on a durable Stainless Steel faceplate marked "EMERGENCY" and "PULL FOR HELP", permanently silk-screened onto the faceplate.
Unit shall mount on single-gang electric "gem" box or plaster ring. Unit shall feature a 'Latching' Normally-Open switch that activates when the six (6) foot nylon cord is pulled. Unit shall have pigtail wire connectors.
A built-in RED 'Call-Placed' lamp shall light when the pull cord station is activated.
The Emergency Call switch may be used with many 'stand-alone' emergency systems.
Contractor shall observe all local and national electrical and building codes.
The Alpha Communications® / Cornell E-114-3 Emergency Pull station is used to initiate a system 'Emergency' signal. It may be used independently or connected with other call stations and/or intercom stations. The E-114-3 has a DPST Normally-Open switch that activates in a 'Latching' fashion, when the pull cord is pulled. In addition, a built-in RED 'Call-Placed' lamp will light when the pull cord station is activated.
Placing a call is accomplished by pulling on the pull cord. This type of 'Latching' pull cord station is typically canceled by sliding the switch back to the up (OFF) position. The E-114-3 station features a rugged stainless steel faceplate, with the word 'EMERGENCY' and "PULL FOR HELP" permanently silk-screened onto the faceplate.
|Dimensions:|| Height: 4.50" (114mm)
Width: 2.75" (69mm)
Depth: 1.50" (38mm)
Projects: 0.50" (13mm) from mounting surface
|Mounting:||Steel City #52171 box with Steel City #52C14 plaster ring, or Alpha Communications® Model #IH358 box with IH357 ring, or EXACT EQUAL. Vertical mount|
|Construction:||Reliable Components mounted to a Stainless Steel faceplate|