Product Specification Sheet APS1095

Rev. 05/2018

E-114 and E-114-1 Emergency Pull Cord Stations

Architects' And Engineers' Specifications

The Emergency Pull station(s) shall be Alpha Communications┬« / Cornell E-114, or approved equal with latching pull cord operated switch, mounted on a durable Stainless Steel faceplate marked "EMERGENCY" and "PULL FOR HELP", permanently silk-screened onto the faceplate. The E-114-1 is the same as the E-114 station, except it has a 2nd set of 'Latching' Normally-Open contacts, where required.

Unit shall mount on single-gang electric "gem" box or plaster ring. Unit shall feature a 'Latching' Normally-Open switch that activates when the six (6) foot nylon cord is pulled. Unit shall have pigtail wire connectors. 

The Emergency Call switch may be used with 'stand-alone' emergency systems, or the DS100 series annunciator(s).

Contractor shall observe all local and national electrical and building codes.

E-114 and E-114-1 Emergency Pull Cord Stations

The Alpha Communications┬« / Cornell E-114 Emergency Pull station is used to initiate a system 'Emergency' signal. It may be used independently or connected with other call stations and/or intercom stations. The E-114 has a DPST Normally-Open switch that activates in a 'Latching' fashion, when the pull cord is pulled.

Placing a call is accomplished by pulling on the pull cord. This type of 'Latching' pull cord station is typically canceled by sliding the switch back to the up (OFF) position. The E-114 station features a rugged stainless steel faceplate, with the word 'EMERGENCY' and "PULL FOR HELP" permanently silk-screened onto the faceplate.

The E-114-1 is the same as the E-114 station, except it has a 2nd set of 'Latching' Normally-Open contacts.

Features
  • Simple, reliable operation
  • Call cancel only at point of origin
  • Call registers at Master Station and on (optional) Dome Lamp
  • Mounted on stainless steel faceplate permanently stamped with the word 'EMERGENCY' and 'PULL FOR HELP'
Specifications
Dimensions:  Height: 4.50" (114mm)
Width: 2.75" (69mm)
Depth: 1.50" (38mm)
Projects: 0.50" (13mm) from mounting surface
Mounting: Steel City #52171 box with Steel City #52C14 plaster ring, or Alpha Communications® Model #IH358 box with IH357 ring, or EXACT EQUAL. Vertical mount
Construction: Reliable Components mounted to a Stainless Steel faceplate
Connection: Plug-in Connectors
Alpha Communications
42 Central Drive • Farmingdale • NY • 11735-1202 • Phone: (631) 777-5500 • Fax: (631) 777-5599
TOLL-FREE: (800) 666-4800 • Web: www.alphacommunications.com • Email: info@alphacommunications.com
Copyright© 1998-2020 Alpha Communications® - All Rights Reserved.
Due to continuous product improvement, all colors, sizes, materials, finishes and specifications are subject to change without notice.