Product Specification Sheet APS1089

Rev. 08/2017

WMD515 Wireless Passive Infrared Motion Detector (AEC200 Series)

Features
  • Reliable 900MHz frequency EchoStream® operation
  • Advanced digital signal processing recognizes human signature size and movement to reduce false alarms      
  • Sequence processor with bi-directional pulse counting and event verification
  • Flat mounting
  • Fire-retardant antique white ABS plastic housing
WMD515 Wireless Passive Infrared Motion Detector (AEC200 Series)

The Alpha Communications® WMD515 Wireless Passive Infra-Red Detector is for use with the AlphaEcall™ 200 series (AEC200) Wireless Emergency Call System. The detector features advanced digital signal processing to recognize "human signature" size and movement, reducing false alarms. The WMD515 has a tamper protected case and the 3V lithium battery is included.

The WMD515 Wireless Passive Infra-Red motion detector with pet immunity is designed for residential and low-traffic commercial applications, with less than 100 activations a day. This PIR uses advanced signal processing to provide outstanding catch performance with unsurpassed false alarm immunity. With Pet Friendly pet immunity, alarms triggered by animals are greatly reduced.

Specifications
Dimensions:

Height: 4.54" (116mm)
Width:  2.50" (64mm)
Depth:  1.60" (41mm)

Detection Range: 40 feet (12m)         
Power: Two (3) 3V Lithium batteries (included)
Battery Life: Approx. 2 years (32°F-120°F)
Environment: -20°C-60°C (-4°F-140°F); up to 90% non-condensing relative humidity
Sleep Time: 90 seconds
Battery: 3V Lithium (model BA505)
Required Components

AlphaEcall™ 200 series Wireless Emergency Call System

Architects' And Engineers' Specifications

The wireless Passive Infra-Red Detector(s) shall be Alpha Communications® WMD515 or approved equal. It shall use the 900 MHz frequency for signal transmission. The WMD515's opaque Fresnel lens shall focus infrared energy on pyroelectric sensors, reducing false alarms caused by stray light or heat sources.

No physical wiring connections shall be required to transmit an alarm call. The WMD515 shall be powered by a 3V lithium battery. Mounting hardware and housing shall permit flat wall mounting. The WMD515 shall have advanced digital signal processing that recognizes human signature size and movement to reduce false alarms.


Alpha Communications® has designed the AlphaEcall™ 200 (AEC200) Series to work as a fully integrated system. Its AEC200DM Master Station has been carefully designed and matched to work with AlphaEcall™ AEC200 wireless and wired peripherals. Alpha Communications® will not warrant or support components of AlphaEcall™ AEC200 that are purchased separately unless the components are add-ons to previously sold systems. Alpha Communications® will also not warrant or support a system that is a mix of Alpha Communications® and Non-Alpha Communications® parts, unless prior written permission has been obtained. In order to track our systems and to inform facilities of software upgrades, full site information (site name, address and phone number) will be required when ordering. Site information and AEC200DM warranty number will also be required when requesting technical support.

Alpha Communications
42 Central Drive • Farmingdale • NY • 11735-1202 • Phone: (631) 777-5500 • Fax: (631) 777-5599
TOLL-FREE: (800) 666-4800 • Web: www.alphacommunications.com • Email: info@alphacommunications.com
Copyright© 1998-2020 Alpha Communications® - All Rights Reserved.
Due to continuous product improvement, all colors, sizes, materials, finishes and specifications are subject to change without notice.