Product Specification Sheet APS1086

Rev. 08/2017

IHS527 Surface Plastic Back Box for Wireless Stations (AEC200 Series)

IHS527 Shown from Side with Snap-On Backplate
Architects' And Engineers' Specifications
The surface-mount single-gang plastic back box shall be Alpha Communications® IHS527 or approved equal. The IHS527 shall be of ABS plastic construction for durability and for unhindered wireless signal transmission. The IHS527 shall be used in wireless applications for mounting the various Emergency Call Stations and their respective Wireless Support Modules. Mounting holes shall be provided on the removable backplate for easy mounting to the finished wall, and on the front for easy mounting of the emergency station to the IHS527 back box. The back box(es) shall be a two-piece construction to allow for quicker battery replacement in the future, without requiring the removal of the emergency call station on the front of the back box. One-piece units without this feature shall not be acceptable.
IHS527 Surface Plastic Back Box for Wireless Stations (AEC200 Series)

The Alpha Communications® IHS527 Surface-Mount Single-Gang Plastic Back Box is for use with the AlphaEcall™ 200 Series Wireless Emergency Call System(s). The back box is used to surface mount the various AlphaEcall™ 200 Series Wireless stations and devices.

The IHS527 is constructed of durable ABS plastic to coordinate with the emergency switches, and does not interfere with wireless transmission signals. The back box includes mounting holes on the back for attachment to the wall. Typically, the Wireless Support Module is placed inside the IHS527, and then the Wireless Emergency Station is attached to the mounting holes on the front of the IHS527.

The IHS527 is made in an exclusive two-piece design, allowing for much quicker battery changes going forward, without the need for removing the calling station from the box.
Features
  • ABS Plastic
  • Easy installation
  • Mounting holes included
  • Strong and durable
  • Two-piece design to allow for quicker battery changes in future
Specifications
Material:
White ABS plastic
Dimensions:

Height: 4.60" (117mm)
Width: 2.90" (74mm)
Depth: 2.55" (65mm)
Plastic: 2.00mm thick

IMPORTANT NOTE
Alpha Communications® has designed the AlphaEcall™ 200 (AlphaECall200) Series to work as a fully integrated system. Its AEC200DM Master Station has been carefully designed and matched to work with AlphaEcall™ 200 Series wireless and wired peripherals. Alpha Communications® will not warrant or support components of AlphaEcall™ that are purchased separately unless the components are add-ons to previously sold systems. Alpha Communications® will also not warrant or support a system that is a mix of Alpha Communications® and Non-Alpha Communications® parts, unless prior written permission has been obtained. In order to track our systems and to inform facilities of software upgrades, full site information (site name, address and phone number) will be required when ordering. Site information and AEC200DM warranty number will also be required when requesting technical support.
Alpha Communications
42 Central Drive • Farmingdale • NY • 11735-1202 • Phone: (631) 777-5500 • Fax: (631) 777-5599
TOLL-FREE: (800) 666-4800 • Web: www.alphacommunications.com • Email: info@alphacommunications.com
Copyright© 1998-2020 Alpha Communications® - All Rights Reserved.
Due to continuous product improvement, all colors, sizes, materials, finishes and specifications are subject to change without notice.