Product Specification Sheet APS1070

Rev. 05/2017

WSS510 Wireless Staff Station (AEC200 Series)

Architects' And Engineers' Specifications

The Wireless Staff Station(s) shall be Alpha Communications® model WPS501, or approved equal shall include an integral "CALL-PLACED" LED indicator, a "CALL" button, and a "CANCEL" button. A call will be registered at the associated master station(s), and optional wired corridor light(s). The station's 'CALL PLACED' LED will light if the CALL switch is pushed. All electronic components needed for these features and functions shall be mounted on a printed circuit board and all station components shall be mounted on a rugged ABS (White) plastic faceplate. The station shall be mounted into a model IHS527 surface back box with its associated WSM501 wireless support module and RY024AM relay module.

Contractor shall observe all local and national electrical and building codes.

Required Components
  • AlphaEcall™ 200 Master Station(s) and system components
  • WSM501 Wireless Support Module
  • RY024AM 24vdc Relay Module
WSS510 Wireless Staff Station (AEC200 Series)

The Alpha Communications® WSS510 Wireless Staff Station incorporates push button operation of call and cancel functions. A call is registered at the Master Station(S) and on an optional wired corridor light and/or corridor zone light (if installed) when the call switch with integral "CALL PLACED" LED is pushed. The "CALL PLACED" LED is also illuminated. Calls are cancelled simply by depressing the "CANCEL" button mounted on a rugged ABS plastic faceplate. The "CALL PLACED" LED will also be extinguished.

The WSS510 is used primarily with the WSM501 Wireless Support Module, and RY024AM Relay Module, on the AlphaEcall™ 200 series wireless emergency-call system(s), but can be used and is backwards compatible with some older systems as well, as well as the AlphaEntry™ series (v5.5 or later).

  • Simple Push-button Calling (using CALL button)
  • Lighted CALL-PLACED LED Indicator
  • Call-reset CANCEL Push-button
  • Flame Retardant type ABS White Plastic Faceplate
Height: 4.50" (114mm)
Width: 2.75" (69mm)
Depth: 1.75" (44mm)
Projects: 0.44" (11mm) from mounting surface (less IHS527 back box)
Surface mounts (along with the WSM501 support module) using the IHS527 surface back box
Flame retardant type ABS plastic faceplate. Switches and electronic components are circuit board mounted.
Plug-in connectors.
Optional Components
  • IHS527 Surface (White) plastic back box
Alpha Communications
42 Central Drive • Farmingdale • NY • 11735-1202 • Phone: (631) 777-5500 • Fax: (631) 777-5599
TOLL-FREE: (800) 666-4800 • Web: • Email:
Copyright© 1998-2020 Alpha Communications® - All Rights Reserved.
Due to continuous product improvement, all colors, sizes, materials, finishes and specifications are subject to change without notice.