The Alpha Communications® WSM501 Wireless Support Module is for use with the AlphaEcall™ 200 (AEC200) Series Wireless Emergency Call System. When the WSM501 is connected to the WPS501 Bed Station or the WSS510 Staff Station, the WSM501 operates as a wireless device in the AlphaEcall™ 200 (AEC200) system. When properly installed, the WSM501 / WPS501 assembly is typically located adjacent to a patient's bed (stainless steel and other metal fixtures may interfere with signal transmission).
The WSM501 is based on EchoStream® spread spectrum technology and transmits signals at the 900 MHz frequency. It includes a universal transmitter and a pre-assembled 6-pin wiring harness for connection to the WPS501 Bed Station or WSS510 Staff Station, as well as two (2) pigtail wires to connect to the model# RY024AM relay module. The WSM501 requires no other wiring connections and is powered by a user-replaceable 3V lithium battery.
Height: 3.60" (92mm)
|Construction:||Attractive, flame retardant ABS plastic|
|Connections:||Plug-in harness and two (2) pigtail connectors|
|Battery Life:||4-5 Years (Typical)|
|Housing:||Plastic single-gang (2.65" deep) surface box model# IHS527|
|Battery:||3V Lithium (replacement model# BA505)|
The Wireless Support Module(s) shall be Alpha Communications® WSM501 or approved equal. When the WSM501 is connected to the WPS501 Bed Station or the WSS510 Staff Station, the WPS501 (or WSS510) shall operate as a wireless device when used with the AlphaEcall 200 (AEC200) Series Emergency Call System. The WSM501 shall use the 900 MHz frequency for signal transmission. The WSM501 shall include a 6-pin wiring harness for connection to the WPS501 Bed Station or the WSS510 Staff Station, as well as two (2) pigtails wires to connect to the RY024AM relay module. The WSM501 shall require no other wiring connections and shall be powered by a 3V lithium battery.
Alpha Communications® has designed the AlphaEcall™ 200 (AEC200) Series to work as a fully integrated system. Its AEC200DM Master Station has been carefully designed and matched to work with AlphaEcall™ AEC200 wireless and wired peripherals. Alpha Communications® will not warrant or support components of AlphaEcall™ AEC200 that are purchased separately unless the components are add-ons to previously sold systems. Alpha Communications® will also not warrant or support a system that is a mix of Alpha Communications® and Non-Alpha Communications® parts, unless prior written permission has been obtained. In order to track our systems and to inform facilities of software upgrades, full site information (site name, address and phone number) will be required when ordering. Site information and AEC200DM warranty number will also be required when requesting technical support.