Product Specification Sheet APS1060

Rev. 08/2017

WPS501 Wireless Single Visual Patient Bed Station

Architects' And Engineers' Specifications

The Wireless Single Visual Patient Station(s) shall be Alpha Communications® model WPS501, or approved equal and shall include a lighted 'CALL-PLACED' indicator, a 'CANCEL' button, and a jack for the required model SF301/8 (single) call-cords or model SF302 (double) call-cords (or other specialty type cords as required). A call will be registered at the associated master station(s), and optional wired corridor light(s). The station's 'CALL PLACED' LED will light if the call switch is pushed or if the call-cord is removed from its jack. All electronic components needed for these features and functions shall be mounted on a printed circuit board and all station components shall be mounted on a rugged ABS (White) plastic faceplate. The station shall be mounted into a model IHS527 surface back box with its associated WSM555 wireless support module.

Contractor shall observe all local and national electrical and building codes.

Required Components
  • AlphaEcall™ 200 Master Station(s) and system components
  • WSM555 Wireless Support Module
  • SF301/8 Call-cord or SF302 (or equivalent model)
  • IHS527 Surface (White) plastic back box
WPS501 Wireless Single Visual Patient Bed Station

The Alpha Communications® WPS501 Wireless Single Visual Patient Station includes a jack for the insertion of a required model SF301/8 (single) or SF302 (dual) call cord set (or equivalent). A call is registered at the associated master station(s) (and optional corridor lights if installed) when the call cord button is used, or if the call cord is accidentally removed from the jack. The station includes a lighted 'CALL-PLACED' indicator when a call is placed and a 'CANCEL' button, mounted on a rugged ABS white plastic faceplate.

The WPS501 is used primarily with the WSM555 Wireless Support Module, on the AlphaEcall™ 200 series wireless emergency-call system(s), but can be used and is backwards compatible with some older systems as well, as well as the AlphaEntry™ series (v5.5 or later).

Features
  • Simple Push-button Calling (using required call cord)
  • Lighted CALL-PLACED LED Indicator
  • Call-reset CANCEL Push-button
  • Call Automatically Registers if Call Cord is accidentally removed
  • Flame Retardant type ABS White Plastic Faceplate
Specifications
Dimensions:
Height: 4.50" (114mm)
Width: 2.75" (69mm)
Depth: 1.75" (44mm)
Projects: 0.44" (11mm) from mounting surface (less IHS527 back box)
Mounting:
Surface mounts (along with the WSM555 support module) using the IHS527 surface back box
Construction:
Flame retardant type ABS plastic faceplate. Switches and electronic components are circuit board mounted.
Connections:
Plug-in connectors.
Alpha Communications
42 Central Drive • Farmingdale • NY • 11735-1202 • Phone: (631) 777-5500 • Fax: (631) 777-5599
TOLL-FREE: (800) 666-4800 • Web: www.alphacommunications.com • Email: info@alphacommunications.com
Copyright© 1998-2020 Alpha Communications® - All Rights Reserved.
Due to continuous product improvement, all colors, sizes, materials, finishes and specifications are subject to change without notice.