Product Specification Sheet APS096

Rev. 07/2013

BE005 / BE007 24VAC/24VDC 6" Vibrating Bell

BE005 / BE007 Vibrating Bells
The Alpha Communications® bell models BE005 (24VAC) and BE007 (24VDC) are for use in general alarm applications and are UL Listed. They are used primarily with our Alpha Ecall™ and CM800 series emergency-call systems.

The bells produce a long, continuous ringing sound and feature low power drain and shockproof construction. Each model is supplied complete with plate and is ideally suited for general alarm applications of medium ambient level.

Specifications
Bell Size: 6.00" (153mm) 
Diameter:
6.00" (153mm) 
Depth:
2.875" (74mm)
Amps:
BE005 - .35; BE007 - .062
VA: 
BE005 - 8.4; BE007 - 1.5
dB at 10 feet:
92
Architects' And Engineers' Specifications

Alpha Communications® BE005 or BE007 bells shall be made of a rugged die-cast housing and include a self compensating solenoid plunger which needs no adjustment.

The BE005 will operate on 24 VAC and the BE007 on 24 VDC and both shall mount on a standard 4"-square electric box.

All necessary installation hardware shall be provided, including 6" bell.

Simple 3-Step Installation (for BE005 Bell)

Universal Adaptaplate mounting plate mounts directly on surface or fits any single gang opening or any 3.25", 3.5", or 4.0" octagon box or any plaster cover with mounting holes on 2.75" centers. Permits quick, easy installation in 3 simple steps. 




1. Pull the wires through the spacious center hole and connect to large binding posts. 2. Slip BE005 bell onto sturdy hangar and push home.  3. Tighten one (1) screw and installation is complete.
Alpha Communications
42 Central Drive • Farmingdale • NY • 11735-1202 • Phone: (631) 777-5500 • Fax: (631) 777-5599
TOLL-FREE: (800) 666-4800 • Web: www.alphacommunications.com • Email: info@alphacommunications.com
Copyright© 1998-2020 Alpha Communications® - All Rights Reserved.
Due to continuous product improvement, all colors, sizes, materials, finishes and specifications are subject to change without notice.