The power supply has rugged construction and shall include power switch, audible alarm indicator, line output indicator, battery output indicator, output receptacle, power cord and AC/DC fuses for utility power and battery protection. The PC-25 is used primarily with the NC300, NC300II and HC345C series microprocessor nurse-call and emergency-call systems, but can be used with other nurse-call, emergency-call and annunciator or intercom systems as well.
The PC-25 shall be U.L. #42T9 listed.
When power is interrupted, the PC-25 immediately cuts in to provide square wave power for the system's central processing equipment until an emergency generator is activated or power is restored. In the event of a prolonged power outage, the PC-25 will provide power to the limit of its battery.
The green LED on the front panel indicates power line output when steady and battery output when flashing. The unit also provides an audible tone during battery output operation. Other features include output receptacles for connection of equipment, power cord for standard 120 volt, 15 amp power circuit, AC fuses to protect the unit from utility power and DC fuses to protect the battery. The PC-25 is U.L. Listed (#42T9).
|At full load:
|At half load:
|Type:||Maintenance-free 24 VDC
||5.90" x 3.30" x 9.50"