The Alpha Communications® 'NH' series power supplies are used with the HT3000 (HT3009, HT3003) and HT2000 (HT2009, HT2003, HT2001) series handset stations to provide intercom amplification and power to operate the associated intercom system, and certain optional components and/or accessories, such as electric door opener(s) etc.
All of these power supplies operate on 16VAC (30VA) low-voltage Class II wiring. For permanent transformer mounting use our Model #SS106 (U.L. Listed) transformer. For plug-in transformer connection use our Model #SS146 (U.L. Listed) transformer.
These NH201TVA-2 and NH208TVU power supplies are designed to easily surface mount right onto the finished wall by means of customer supplied screws or the convenient plastic 'Din Rail' bracket supplied with each power supply. The NH200A and NH908A power supplies are P.C. board type, with self-stick mounting tabs and mounting holes for surface wall or other types of mounting.
NH200A power supply is used with HT3003 or HT2003 series 5-wire apt. entry intercom systems. NH201TVA-2 power supply is used with HT2001 series 3-wire apt./entry intercom systems. NH208TVU power supply is used with HT2006 series handsets for handset to handset internal communication, as well as communication to one or more door speakers. NH908A power is used with HT2006 series handsets for internal handset to handset communication only.
|Dimensions:||Models NH201TVA-2 and NH208TVU, 4.25"W (108mm) x 2.375"H (60mm) x 4.75"D (120mm). All dimensions shown are outside dimensions with protective covers installed. Models NH200A and NH908A, 3.50"W (89mm) x 3.50"H (89mm) x .75"D (20mm).|
|Volume:||Adjustable Volume Control (potentiometer) built-in (except for model NH908A).|
|Connections:||Positive Screw Terminal Connectors.|
The power supply/amplifier shall be Alpha Communications®/S.T.R.™ (NH200A, NH201TVA-2, NH208TVU, or NH908A) or equivalent. NH200A, NH208TVU, or NH908A power supply shall operate from a 16VAC (30VA) U.L. Listed transformer (SS106 or SS146) and NH201TVA-2 power supply shall operate from a 12VAC (40VA) U.L. Listed transformer (T1240).
All wiring to power supply/amplifier shall be low-voltage Class II wiring, installed as per all federal, state, and local electrical codes. Power supply/amplifier shall surface mount right to the finished wall and shall be installed in a suitable environment that is free from excessive dirt, dust, temperature, humidity, grease and water. Power supply/amplifier shall provide the intercom amplification and signalling power for the proper system operation. For most secure installation, power supply should be installed into a lockable equipment cabinet/housing. Power supply/amplifier shall be installed a safe distance from any source of electrical interference.
Contractor shall observe all local and national electrical and building codes.