Product Specification Sheet APS023

Rev. 07/2013

CP202SS Vandal-Resistant Stainless Steel Cover Plate

This Specsheet is for a product which is discontinued. Please contact us for alternative products.
CP202SS
Architects' And Engineers' Specifications

The outdoor remote (OR202) shall be covered by an Alpha Communications® model CP202SS cover plate, or approved equal. Cover plate shall be minimum 16 gauge high-carbon brush finish stainless steel. A single momentary action, solid-metal push-button assembly shall be provided for calling function. The speaker shall be protected by a fine mesh grille. The CP202SS cover plate shall be installed with Torx type vandal-resistant screw fasteners, included with the station. Contractor shall supply a model '8TORXscrewdriver tool/tip to the building owner for future system maintenance. Unit shall surface mount right on the surface of the wall.

CP202SS Vandal-Resistant Stainless Steel Cover Plate

The Alpha Communications® CP202SS stainless steel cover plate is designed specifically to work with our popular OR202 remote station (from our SM202K Duo Com™ intercom kit). Made from 16 gauge high-carbon brush finish stainless steel, with solid metal push-button, these stations are built to last and to minimize vandalism and abuse.

The CP202SS installs right over the existing OR202 remote station and is secured to the wall with vandal-resistant Torx head type screws. (Requires 8TORX screwdriver tool/tip).

*NOTE: The CP202SS does not include a Torx™ head screwdriver tip. This can be ordered separately, using our Model# 8TORX.

Features
  • Simple Installation, mounts right on surface of wall
  • Made of Rugged 16 gauge High-Carbon Stainless Steel
  • Tamper and Vandal-Resistant
  • Solid Metal Call Button Assembly
  • Mounts right over our model OR202 Remote Station
  • Metal Mesh Speaker Grille
  • Installs with Torx type tamper-resistant mounting screws (included)*
Specifications
Dimensions:

3.63"W (93mm) x 6.13"H (156mm) x 0.50"D (13mm).

Construction:

Solid 16 gauge high-carbon brush finish Stainless Steel faceplate.

Push Button:

Solid Metal push-button assembly.

Marking:

The word 'CALL' permanently engraved onto face of unit

Mounting:

Surface (over existing OR202 remote). 

Alpha Communications
42 Central Drive • Farmingdale • NY • 11735-1202 • Phone: (631) 777-5500 • Fax: (631) 777-5599
TOLL-FREE: (800) 666-4800 • Web: www.alphacommunications.com • Email: info@alphacommunications.com
Copyright© 1998-2020 Alpha Communications® - All Rights Reserved.
Due to continuous product improvement, all colors, sizes, materials, finishes and specifications are subject to change without notice.