Product Specification Sheet APS008

Rev. 09/2013

AP001 and AP001B Steel Adapter Plate (painted White)

AP001 (shown)

Architects' And Engineers' Specifications

The adapter plate(s) shall be Alpha Communications® Model AP001 (or AP001B) or approved equal and shall be large enough to cover the area occupied by the previous intercom unit. The adapter plate shall be made of 22 gauge cold-rolled steel, painted in a White epoxy coat paint finish. The adapter plate(s) shall be punched to cover the existing back box, and for the apartment intercom (or videointercom) station to be mounted onto the adapter plate(s). If required, contractor shall paint the adapter plate(s) to match the existing wall finish.

 

Important Note
Since these adapter plates can be used with a variety of stations and devices, we cannot guarantee a color match between the stations and these adapter plates!
AP001 and AP001B Adapter Plates

The Alpha Communications® AP001 and AP001B adapter plates are designed specifically to cover existing over-sized apartment intercom back boxes and other existing wall openings.

Once the adapter plate is affixed to the wall, you can install your open-voice or handset apartment intercom station or surface mount video-intercom station directly onto the adapter plate.

We will gladly punch up to four (4) mounting holes (at no additional cost), to enable you to easily mount the plate over the existing back box. Simply provide us with a clear sketch showing the mounting holes you need. If you choose, mounting holes can be easily drilled right on the job-site. The model AP001 features a large (center) hole for wire access and six (6) pre-punched holes for mounting common apt. intercom stations and handsets.

Installation is quick, easy, attractive and eliminates the need for plastering and painting over the existing hole.

Model AP001B is the same as the AP001, except there are no mounting holes on the front of the faceplate. This enables you to punch or drill any special holes you may need, or to leave the faceplate totally blank.

Custom-sized adapter plates are also available in aluminum, stainless steel, polished brass, or other painted finishes. Please send a detailed sketch to our sales dept., along with the quantity needed, for a prompt quotation.

Features
  • Heavy Duty 22 Gauge Cold-Rolled Steel Faceplate
  • Easy Installation with pre-punched holes
  • Decorator White Color
  • High Quality Powder Coat Painted Finish
  • Rugged and Good-Looking
  • Large size neatly covers existing wall openings
  • Works with a variety of apartment intercom and videointercom stations and handsets
Options / Componenets
Dimensions:
6.625"W (169mm) x 8.875"H (226mm) x 0.13"D (4mm).

Construction:

Steel faceplate with White powder coat paint finish

Center Hole:

1.00" diameter (25mm) round hole for wire. (No holes in faceplate of model AP001B).

Alpha Communications
42 Central Drive • Farmingdale • NY • 11735-1202 • Phone: (631) 777-5500 • Fax: (631) 777-5599
TOLL-FREE: (800) 666-4800 • Web: www.alphacommunications.com • Email: info@alphacommunications.com
Copyright© 1998-2020 Alpha Communications® - All Rights Reserved.
Due to continuous product improvement, all colors, sizes, materials, finishes and specifications are subject to change without notice.